|
APPLYING BLUE GOO ENVIRONMENT FRIENDLY POWER CLEANER:
For use on: Surfboards, Paddle boards, Ocean Canoes (OC1, OC2, OC4,
OC6) and Kayaks, K1, K4, K6 boats, Racing Skulls, Wind surfers, Kite boards,
Jet Ski’s etc.
Use to clean, restore and replenish surface.
1) For surfboards, remove wax build-up with plastic scraper. Residual
wax residue will be removed by Blue Goo.
2) Apply liberally with damp sponge or cloth. Blue Goo will prep the surface
for Xtreme Cream by cleaning it of wax, dirt, salt, grime and scuff marks.
Blue Goo has a light grit which will clean but will not damage the surface.
3) Rinse off or rub out with soft cloth. For best results, let dry to
haze then buff with soft cloth.
CAUTION: MAY REMOVE PAINT, CLEAR COAT OR DECALS. TEST IN A SMALL, INCONSPICUOUS
SPOT FIRST.
APPLYING XTREME CREAM:
For optimum performance on new boards and rigs; Use Blue Goo Power Cleaner
per instructions for a quick wipe down. Rinse and dry. This will prep
the surface for the application of Xtreme Cream High Performance Coating
1) Shake bottle.
2) Use damp sponge or soft cloth to apply; squeeze product liberally onto
surface and buff in a circular motion. (bottom only for surfboards because
Wax will not stick and deck will be too slick to stand on)! Rub in a much
as needed to fully coat surface. Xtreme Cream can be applied and rubbed
out with a buffer {use lambs wool or soft cloth) for maximum bonding.
3) Cover entire bottom, fins and rails for surfboards or apply to select
areas to enhance performance. Can be applied to decks and entire rigs
to keep them looking clean and new. Salt water will not stick to Xtreme
Cream giving you an easy clean up!
4) Let dry to haze. Air temperature determines the drying time. However,
you can wipe off immediately or leave on overnight for best results. The
longer it sits, the better Xtreme Cream bonds. Xtreme Cream’s exotic
polymer starts bonding from the moment it’s applied and completely
cures in approximately two weeks time.
5) Rub out with soft cloth, making sure all Xtreme Cream residue is removed.
Use buffer for optimum shine and performance. Instantly, you’ll see
and feel the difference!
Xtreme Cream High Performance Bottom Coating will last approximately
2-4 months depending on use. A light coat, (approximately one ounce) covers
100 sq. ft.
To Remove Xtreme Creme: 1. Apply Blue Goo product per instructions.
If you have any questions or concerns regarding our products contact:
On It Pro, LLC 4562 Westinghouse St. Unit E, Ventura, Ca 93003
email: info@onitpro.com
|